AVEVA Edge License Activation

AVEVA Edge (Formerly InTouch Machine Edition)

Activate your AVEVA Edge License.

Select the type of license you want to activate and follow the instructions:

Close AVEVA Edge (make sure that the process “Studio Manager.exe” is not running)
Run the “Register” module (Windows button > “Register”)
Select “Softkey > Check > Change License”
Copy the “Hardware Identifier”
Visit our site to activate the license. You need your Wonderware credentials to log in to the site. You may also be asked the “License Serial Number” for the purchased license. Paste the “Hardware Identifier” into the web form and click submit.
If a valid “Hardware Identifier” has been entered, then a license “Activation Code” is returned. Copy/paste or type the code in the “Activation Code” field from the “Register” module, and then click Authorize. The new license settings are saved on the computer and a confirmation message is displayed. If the new “Activation Code” is not validated, an error message is displayed. If this happens, double-check that you have entered the “Activation Code” correctly. If you still get an error message, visit technical support page to contact our technical support department.

Run Remote Agent (CEServer.exe) on the runtime device
Open AVEVA Edge IDE on your development computer
Click on the “Connect” icon from the “Home” tab on the ribbon interface
Type the IP address of the runtime station, and click on “Connect”
Select the “Embedded License” tab from the “Remote Management” dialog and copy the “Hardware Identifier”
Visit our site to activate the license. You need your Wonderware credentials to log in to the site. You may also be asked the “License Serial Number” for the purchased license. Paste the “Hardware Identifier” into the web form and click submit.
If a valid “Hardware Identifier” has been entered, then a license “Activation Code” is returned. Copy/paste or type the code in the “Activation Code” field from the “Remote Management” dialog, and then click Send. The new license settings are saved on the runtime device and a confirmation message is displayed. If the new “Activation Code” is not validated, an error message is displayed. If this happens, double-check that you have entered the “Activation Code” correctly. If you still get an error message, visit technical support page to contact our technical support department.

Close AVEVA Edge (make sure that the process “Studio Manager.exe” is not running)
Run the “Register” module (Windows button > “Register”)
Select “Hardkey > Check > Change License”
Copy the “Hardware Identifier”
Visit our site to activate the license. You need your Wonderware credentials to log in to the site. You may also be asked the “License Serial Number” for the purchased license. Paste the “Hardware Identifier” into the web form and click submit.
If a valid “Hardware Identifier” has been entered, then a license “Activation Code” is returned. Copy/paste or type the code in the “Activation Code” field from the “Register” module, and then click Authorize. The new license settings are saved on the computer and a confirmation message is displayed. If the new “Activation Code” is not validated, an error message is displayed. If this happens, double-check that you have entered the “Activation Code” correctly. If you still get an error message, visit technical support page to contact our technical support department.

Plug the USB Hardkey (token) into your runtime device
Run Remote Agent (CEServer.exe) on the runtime device
Open the AVEVA Edge IDE on your development computer
Click on the “Connect” icon from the “Home” tab on the ribbon interface
Type the IP address of the runtime station, and click on “Connect”
Select the “Embedded License” tab from the “Remote Management” dialog and copy the “Hardware Identifier”
Visit our site to activate the license. You need your Wonderware credentials to log in to the site. You may also be asked the “License Serial Number” for the purchased license. Paste the “Hardware Identifier” into the web form and click submit.
If a valid “Hardware Identifier” has been entered, then a license “Activation Code” is returned. Copy/paste or type the code in the “Activation Code” field from the “Remote Management” dialog, and then click Send. The new license settings are saved on the runtime device and a confirmation message is displayed. If the new “Activation Code” is not validated, an error message is displayed. If this happens, double-check that you have entered the “Activation Code” correctly. If you still get an error message, visit technical support page to contact our technical support department.

Simply plug the USB Hardkey (token) into your computer - as simple as that!